Woven Mesh

High-Performance Industrial Screening & Filtration Solutions

Precision Engineered for Screening, Filtration, Reinforcement, and Protection Across Industries

Woven mesh is constructed from high-quality stainless steel wires, nickel wires, copper wires, brass wires, Monel wires, Hastelloy wires and other metal wires by using advanced weave technology. It features high temperature resistance, good corrosion resistance, high tensile strength and great abrasion resistance. In addition, its precise opening size also ensures a stable filter rating. As one of the main filter materials, woven mesh can be fabricated into round, belt, cylinder, pleated, and other shape filter elements and are widely used in the separation and filtration of petroleum, chemical, pharmaceuticals, food and other industries.

Woven Mesh Features

Precise aperture sizes from micron to inch scale
High tensile strength and resistance to vibration fatigue
Corrosion and temperature resistance based on alloy selection
Cleanable, reusable, and suitable for continuous operation
Customizable in roll form, cut pieces, or fabricated components

Materials Available

Different Weaving Methods

• Plain Weave

The simplest and most commonly used type with square openings. It is woven by alternating the weft wire over and under the warp wire. The weft wire and warp wire are in the same diameter, delivering uniform opening sizes. It is often used for weaving coarse mesh and typically serves as the protection layer of coarse filtration and filter media.

• Plain Dutch Weave

Similar to plain weave, but the diameter of the warp wire is bigger than the weft wire. During the weaving process, the finer weft wires are driven closer to form a tight filter medium that has a higher filter rating and strength than plain weave. Besides, it also forms tapered or wedge-shaped openings. Typically, coarse mesh works as a reinforcing layer of the metal sintered mesh, and the fine mesh as the filtration layer of the metal sintered mesh.

• Reverse Dutch Weave

It is the reverse of the plain Dutch weave wire arrangement, using larger warp wires and smaller weft wires. It adopts smaller warp wires to offer a tight mesh structure for filtration, and larger weft wires deliver higher strength for the woven mesh to extend its service life. Continuous Filter Belts are generally produced with reverse Dutch weave.

• Twill Weave

Each weft wire passes alternately over and under 2 warp wires, staggered on successive warps. It is generally used for weaving fine mesh and is more suitable for fine filtration than plain weave.

• Twill Dutch Weave

It combines the Dutch and twill weaving processes. Each warp wire passes over and under two fine weft wires. Weft wires are driven closer to each other, forming a tight woven mesh with tapered or wedge-shaped openings. In addition, it also forms smaller opening sizes. Typically, coarse mesh works as a reinforcing layer of the metal sintered mesh, and the fine mesh as the filtration layer of the metal sintered mesh.

Woven Mesh Industrial Applications

Screening & Classification
Heavy-duty woven wire mesh is used in vibrating screens for mining, aggregates, and mineral processing to separate materials by size with high throughput and durability.
Industrial Filtration
Dutch weave stainless steel mesh provides precise retention for liquid-solid and gas-solid separation in chemical processing, water treatment, hydraulic systems, and refinery applications.
Food, Pharmaceutical & Chemical Processing
Fine-mesh stainless steel wire cloth ensures product uniformity and contamination control in sifting operations, meeting sanitation and cleanability requirements.
Material Handling & Thermal Processing
Open-mesh conveyor belts and dryer belts offer efficient airflow and heat transfer while supporting product loads in food processing, ceramics, and industrial drying applications.
Safety & Architectural Applications
Woven wire mesh is used in machine guards, ventilation screens, and decorative facades, combining visibility, strength, and airflow with aesthetic flexibility.
Composite Reinforcement
Embedded in plastics, concrete, or other matrix materials, wire mesh enhances tensile strength and crack resistance with consistent structural performance.

Warp. All wires run lengthwise of the cloth as woven.
Weft. All wires running across the cloth are woven.
Mesh Count. The number of openings per lineal inch reflects the tightness of the mesh opening.
Wire Diameter. The thickness of the wire before weaving.
Mesh Opening. The distance between two adjacent wires.
Mesh Centers. The distance between the middle points of two adjacent wires.

Specification

Woven Square Wire Mesh

Table 1: Plain Weave Mesh Specifications

Model	Mesh Count (Warp × Weft)	Wire Diameter (Inch)	Wire Diameter (mm)	Mesh Opening (Inch)	Mesh Opening (mm)	Open Area (%)
HJ-PW-0185	1 × 1	0.08	2.03	0.92	23.37	85
HJ-PW-0178	1 × 1	0.118	3	0.882	22.4	78
HJ-PW-0276	2 × 2	0.063	1.6	0.437	11.1	76
HJ-PW-0278	2 × 2	0.059	1.5	0.441	11.2	78
HJ-PW-0370	3 × 3	0.054	1.37	0.279	7.09	70
HJ-PW-0374	3 × 3	0.047	1.2	0.286	7.27	74
HJ-PW-0471	4 × 4	0.039	1	0.211	5.35	71
HJ-PW-0466	4 × 4	0.047	1.19	0.203	5.16	66
HJ-PW-0456	4 × 4	0.063	1.6	0.187	4.75	56
HJ-PW-0565	5 × 5	0.039	1	0.161	4.08	65
HJ-PW-0563	5 × 5	0.041	1.04	0.159	4.04	63
HJ-PW-0662	6 × 6	0.035	0.9	0.131	3.33	62
HJ-PW-0662	6 × 6	0.035	0.89	0.132	3.35	62
HJ-PW-0761	7 × 7	0.031	0.8	0.111	2.83	61
HJ-PW-0860	8 × 8	0.028	0.71	0.097	2.46	60
HJ-PW-1056	10 × 10	0.025	0.64	0.075	1.91	56
HJ-PW-1058	10 × 10	0.024	0.6	0.076	1.94	58
HJ-PW-1252	12 × 12	0.023	0.584	0.06	1.52	52
HJ-PW-1258	12 × 12	0.02	0.508	0.063	1.6	58
HJ-PW-1255	12 × 12	0.022	0.55	0.062	1.57	55
HJ-PW-1446	14 × 14	0.023	0.584	0.048	1.22	46
HJ-PW-1452	14 × 14	0.02	0.508	0.051	1.3	52
HJ-PW-1651	16 × 16	0.018	0.457	0.0445	1.13	51
HJ-PW-1647	16 × 16	0.02	0.5	0.043	1.09	47
HJ-PW-1848	18 × 18	0.017	0.432	0.0386	0.98	48
HJ-PW-1842	18 × 18	0.02	0.5	0.036	0.91	42
HJ-PW-2036	20 × 20	0.02	0.508	0.03	0.76	36
HJ-PW-2046	20 × 20	0.016	0.406	0.034	0.86	46
HJ-PW-2047	20 × 20	0.016	0.4	0.034	0.87	47
HJ-PW-2042	20 × 20	0.018	0.45	0.032	0.82	42
HJ-PW-2444	24 × 24	0.014	0.356	0.0277	0.7	44
HJ-PW-2445	24 × 24	0.014	0.35	0.028	0.71	45
HJ-PW-3037	30 × 30	0.013	0.33	0.0203	0.52	37
HJ-PW-3041	30 × 30	0.012	0.305	0.0213	0.54	41
HJ-PW-3053	30 × 30	0.009	0.229	0.0243	0.62	53
HJ-PW-3050	30 × 30	0.01	0.25	0.023	0.6	50
HJ-PW-4036	40 × 40	0.01	0.254	0.015	0.38	36
HJ-PW-4003	40 × 40	0.008	2	0.017	0.44	3
HJ-PW-5030	50 × 50	0.009	0.229	0.011	0.28	30
HJ-PW-5037	50 × 50	0.008	0.203	0.012	0.31	37
HJ-PW-5042	50 × 50	0.007	0.18	0.013	0.33	42
HJ-PW-6030	60 × 60	0.0075	0.191	0.0092	0.23	30
HJ-PW-6034	60 × 60	0.007	0.178	0.0097	0.25	34
HJ-PW-6038	60 × 60	0.006	0.16	0.01	0.26	38
HJ-PW-6030	60 × 60	0.007	0.19	0.009	0.23	30
HJ-PW-7030	70 × 70	0.0065	0.165	0.0078	0.2	30
HJ-PW-7044	70 × 70	0.005	0.12	0.01	0.24	44
HJ-PW-8023	80 × 80	0.0065	0.165	0.006	0.15	23
HJ-PW-8039	80 × 80	0.005	0.12	0.008	0.2	39
HJ-PW-8035	80 × 80	0.005	0.13	0.007	0.19	35
HJ-PW-9031	90 × 90	0.005	0.127	0.0061	0.16	31
HJ-PW-10030	100 × 100	0.0045	0.114	0.0055	0.14	30
HJ-PW-10035	100 × 100	0.004	0.102	0.006	0.15	35
HJ-PW-10043	100 × 100	0.0035	0.089	0.0065	0.17	43
HJ-PW-10036	100 × 100	0.004	0.1	0.008	0.15	36
HJ-PW-10031	100 × 100	0.004	0.11	0.006	0.14	31
HJ-PW-11031	110 × 110	0.004	0.102	0.0051	0.13	31
HJ-PW-12031	120 × 120	0.0037	0.094	0.0064	0.12	31
HJ-PW-12056	120 × 120	0.002	0.06	0.007	0.18	56
HJ-PW-12033	120 × 120	0.004	0.09	0.005	0.12	33
HJ-PW-12052	120 × 120	0.002	0.058	0.008	0.15	52
HJ-PW-12038	120 × 120	0.003	0.08	0.005	0.13	38
HJ-PW-14037	140 × 140	0.003	0.07	0.004	0.11	37
HJ-PW-14555	145 × 145	0.002	0.045	0.005	0.13	55
HJ-PW-15037	150 × 150	0.0026	0.066	0.0041	0.1	37
HJ-PW-15042	150 × 150	0.002	0.06	0.004	0.11	42
HJ-PW-15050	150 × 150	0.002	0.05	0.005	0.12	50
HJ-PW-16036	160 × 160	0.0025	0.064	0.0038	0.1	36
HJ-PW-16036	160 × 160	0.002	0.05	0.004	0.11	47
HJ-PW-16056	160 × 160	0.002	0.04	0.005	0.12	56
HJ-PW-16060	160 × 160	0.001	0.035	0.005	0.12	60
HJ-PW-16544	165 × 165	0.002	0.05	0.004	0.1	44
HJ-PW-18035	180 × 180	0.0023	0.058	0.0033	0.08	35
HJ-PW-18041	180 × 180	0.002	0.05	0.004	0.09	41
HJ-PW-18051	180 × 180	0.002	0.04	0.004	0.1	51
HJ-PW-20034	200 × 200	0.0021	0.053	0.0029	0.07	34
HJ-PW-20032	200 × 200	0.002	0.053	0.003	0.07	32
HJ-PW-20038	200 × 200	0.002	0.05	0.003	0.08	38
HJ-PW-20048	200 × 200	0.002	0.04	0.003	0.09	48
HJ-PW-22034	220 × 220	0.002	0.05	0.003	0.07	34
HJ-PW-23048	230 × 230	0.001	0.035	0.003	0.08	48
HJ-PW-23053	230 × 230	0.001	0.03	0.003	0.08	53
HJ-PW-25036	250 × 250	0.0016	0.041	0.0024	0.06	36
HJ-PW-25036	250 × 250	0.002	0.04	0.002	0.06	36
HJ-PW-25044	250 × 250	0.001	0.035	0.003	0.07	44
HJ-PW-25049	250 × 250	0.001	0.03	0.003	0.07	49
HJ-PW-27032	270 × 270	0.0016	0.041	0.0021	0.05	32
HJ-PW-27040	270 × 270	0.001	0.035	0.002	0.06	40
HJ-PW-27044	270 × 270	0.001	0.03	0.003	0.06	44
HJ-PW-28040	280 × 280	0.001	0.035	0.002	0.06	40
HJ-PW-30030	300 × 300	0.0051	0.038	0.0018	0.05	30
HJ-PW-30039	300 × 300	0.001	0.03	0.002	0.05	39
HJ-PW-32530	325 × 325	0.0014	0.036	0.0017	0.04	30
HJ-PW-32544	325 × 325	0.001	0.025	0.002	0.05	44
HJ-PW-32541	325 × 325	0.001	0.028	0.002	0.05	41
HJ-PW-32539	325 × 325	0.001	0.03	0.002	0.05	39
HJ-PW-35048	350 × 350	0.001	0.022	0.002	0.05	48
HJ-PW-37048	370 × 370	0.001	0.022	0.002	0.05	48
HJ-PW-40088	400 × 400	0.001	0.025	0.0015	0.038	88
HJ-PW-40042	400 × 400	0.001	0.022	0.002	0.04	42
HJ-PW-42042	420 × 420	0.001	0.022	0.002	0.04	42
HJ-PW-45044	450 × 450	0.001	0.02	0.001	0.04	44
HJ-PW-50025	500 × 500	0.001	0.025	0.001	0.03	25
HJ-PW-63525	635 × 635	0.0008	0.02	0.0008	0.02	25

Table 2: Twill Weave Mesh Specifications

Model	Mesh Count (Warp × Weft)	Wire Diameter (Inch)	Wire Diameter (mm)	Mesh Opening (Inch)	Mesh Opening (mm)	Open Area (%)
HJ-TW-0185	1 × 1	0.08	2.03	0.92	23.37	85
HJ-TW-0276	2 × 2	0.063	1.6	0.437	11.1	76
HJ-TW-0370	3 × 3	0.054	1.37	0.279	7.09	70
HJ-TW-0456	4 × 4	0.063	1.6	0.187	4.75	56
HJ-TW-0466	4 × 4	0.047	1.19	0.203	5.16	66
HJ-TW-0563	5 × 5	0.041	1.04	0.159	4.04	63
HJ-TW-0662	6 × 6	0.035	0.89	0.132	3.35	62
HJ-TW-0860	8 × 8	0.028	0.71	0.097	2.46	60
HJ-TW-1056	10 × 10	0.025	0.64	0.075	1.91	56
HJ-TW-1064	10 × 10	0.02	0.51	0.08	2.03	64
HJ-TW-1252	12 × 12	0.023	0.584	0.06	1.52	52
HJ-TW-1258	12 × 12	0.02	0.508	0.063	1.6	58
HJ-TW-1446	14 × 14	0.023	0.584	0.048	1.22	46
HJ-TW-1452	14 × 14	0.02	0.508	0.051	1.3	52
HJ-TW-1651	16 × 16	0.018	0.457	0.0445	1.13	51
HJ-TW-1848	18 × 18	0.017	0.432	0.0386	0.98	48
HJ-TW-2036	20 × 20	0.02	0.508	0.03	0.76	36
HJ-TW-2046	20 × 20	0.016	0.406	0.034	0.86	46
HJ-TW-2444	24 × 24	0.014	0.356	0.0277	0.7	44
HJ-TW-3037	30 × 30	0.013	0.33	0.0203	0.52	37
HJ-TW-3041	30 × 30	0.012	0.305	0.0213	0.54	41
HJ-TW-3053	30 × 30	0.009	0.229	0.0243	0.62	53
HJ-TW-3538	35 × 35	0.011	0.279	0.0176	0.45	38
HJ-TW-4036	40 × 40	0.01	0.254	0.015	0.38	36
HJ-TW-5030	50 × 50	0.009	0.229	0.011	0.28	30
HJ-TW-5037	50 × 50	0.008	0.203	0.012	0.31	37
HJ-TW-6030	60 × 60	0.0075	0.191	0.0092	0.23	30
HJ-TW-6034	60 × 60	0.007	0.178	0.0097	0.25	34
HJ-TW-7030	70 × 70	0.0065	0.165	0.0078	0.2	30
HJ-TW-8023	80 × 80	0.0065	0.165	0.006	0.15	23
HJ-TW-8032	80 × 80	0.0055	0.14	0.007	0.18	32
HJ-TW-9031	90 × 90	0.005	0.127	0.0061	0.16	31
HJ-TW-10030	100 × 100	0.0045	0.114	0.0055	0.14	30
HJ-TW-10035	100 × 100	0.004	0.102	0.006	0.15	35
HJ-TW-10043	100 × 100	0.0035	0.089	0.0065	0.17	43
HJ-TW-11031	110 × 110	0.004	0.1016	0.0051	0.13	31
HJ-TW-12031	120 × 120	0.0037	0.094	0.0064	0.117	31
HJ-TW-15037	150 × 150	0.0026	0.066	0.0041	0.104	37
HJ-TW-15034	150 × 150	0.07	0.0028	0.0993	0.004	34
HJ-TW-16036	160 × 160	0.0025	0.0635	0.0038	0.097	36
HJ-TW-16539	165 × 165	0.058	0.0023	0.0959	0.004	39
HJ-TW-18035-1	180 × 180	0.0023	0.0584	0.0033	0.084	35
HJ-TW-18035-2	180 × 180	0.058	0.0023	0.0831	0.003	35
HJ-TW-20034	200 × 200	0.0021	0.0533	0.0029	0.074	34
HJ-TW-20029	200 × 200	0.058	0.0023	0.069	0.003	29
HJ-TW-22531	225 × 225	0.05	0.002	0.0629	0.003	31
HJ-TW-23534	235 × 235	0.045	0.0018	0.0631	0.003	34
HJ-TW-25036-1	250 × 250	0.0016	0.0406	0.0024	0.061	36
HJ-TW-25036-2	250 × 250	0.04	0.0016	0.0616	0.002	36
HJ-TW-27032-1	270 × 270	0.0016	0.0406	0.0021	0.053	32
HJ-TW-27032-2	270 × 270	0.04	0.0016	0.0541	0.002	32
HJ-TW-28031	280 × 280	0.04	0.0016	0.0507	0.002	31
HJ-TW-30028	300 × 300	0.04	0.0016	0.0447	0.002	28
HJ-TW-30030-1	300 × 300	0.038	0.0015	0.0467	0.002	30
HJ-TW-30030-2	300 × 300	0.0051	0.0381	0.0018	0.046	30
HJ-TW-30035	300 × 300	0.035	0.0014	0.0497	0.002	35
HJ-TW-31532	315 × 315	0.035	0.0014	0.0456	0.002	32
HJ-TW-32530-1	325 × 325	0.0014	0.0356	0.0017	0.043	30
HJ-TW-32530-2	325 × 325	0.035	0.0014	0.0432	0.002	30
HJ-TW-35027	350 × 350	0.035	0.0014	0.0376	0.002	27
HJ-TW-35034	350 × 350	0.03	0.0012	0.0426	0.002	34
HJ-TW-36333	363 × 363	0.03	0.0012	0.04	0.002	33
HJ-TW-40088	400 × 400	0.001	0.0254	0.0015	0.37	88
HJ-TW-40036	400 × 400	0.025	0.001	0.0385	0.002	36
HJ-TW-40031	400 × 400	0.028	0.0011	0.0355	0.001	31
HJ-TW-40027	400 × 400	0.03	0.0012	0.0335	0.001	27
HJ-TW-45030	450 × 450	0.025	0.001	0.0314	0.001	30
HJ-TW-50025-1	500 × 500	0.001	0.0254	0.001	0.025	25
HJ-TW-50025-2	500 × 500	0.025	0.001	0.0258	0.001	25
HJ-TW-51025	510 × 510	0.025	0.001	0.0248	0.001	25
HJ-TW-53025	530 × 530	0.024	0.0009	0.0239	0.001	25
HJ-TW-63525	635 × 635	0.02	0.0008	0.02	0.001	25
HJ-TW-79528	795 × 795	0.015	0.0006	0.017	0.001	28

Woven Dutch Wire Mesh

Table 3: Plain Dutch Weave Mesh Specifications

Model	Mesh Count (Warp × Weft)	Wire Diameter (Warp × Weft)	Wire Diameter (Warp × Weft)	Filter Rating
–	–	inch	mm	μm
HJ-PDW-06320	6 × 44	0.0394 × 0.0236	1.0 × 0.60	320
HJ-PDW-07315	7 × 50	0.0276 × 0.0213	0.70 × 0.54	315
HJ-PDW-08280	8 × 60	0.0217 × 0.0177	0.55 × 0.45	280
HJ-PDW-08385	8 × 62	0.0248 × 0.0177	0.63 × 0.45	385
HJ-PDW-10306	10 × 79	0.0197 × 0.0140	0.5 × 0.355	306
HJ-PDW-12297	12 × 64	0.0228 × 0.0157	0.58 × 0.4	297
HJ-PDW-14235	14 × 88	0.0157 × 0.0118	0.4 × 0.3	235
HJ-PDW-19120	19 × 140	0.0124 × 0.0079	0.315 × 0.2	120
HJ-PDW-20172	20 × 300	0.0138 × 0.0079	0.35 × 0.2	172
HJ-PDW-24115	24 × 110	0.0140 × 0.0098	0.355 × 0.25	115
HJ-PDW-25100	25 × 140	0.0110 × 0.0079	0.28 × 0.2	100
HJ-PDW-30122	30 × 150	0.0098 × 0.0071	0.25 × 0.18	122
HJ-PDW-35106	35 × 175	0.0088 × 0.0063	0.224 × 0.16	106
HJ-PDW-40092	40 × 200	0.0079 × 0.0055	0.18 × 0.14	92
HJ-PDW-45080	45 × 250	0.0063 × 0.0044	0.16 × 0.112	80
HJ-PDW-50072	50 × 250	0.0055 × 0.0043	0.14 × 0.11	72
HJ-PDW-60062	60 × 300	0.0055 × 0.0035	0.14 × 0.09	62
HJ-PDW-65056	65 × 330	0.0043 × 0.0031	0.11 × 0.08	56
HJ-PDW-70053	70 × 350	0.0043 × 0.0031	0.11 × 0.08	53
HJ-PDW-78049	78 × 400	0.0043 × 0.0028	0.11 × 0.07	49
HJ-PDW-80046	80 × 400	0.0039 × 0.0026	0.1 × 0.065	46

Table 4: Twill Dutch Weave Mesh Specifications

Model	Mesh Count	Warp Wire Diameter	Warp Wire Diameter	Weft Wire Diameter	Weft Wire Diameter	Porosity	Thickness		Weight	Filter Rating
–	–	Inch	mm	Inch	mm	%	Inch	mm	kg/m2	μm
HJ-TDW-43200	14 × 128	0.02	0.5	0.016	0.4	43	0.052	1.31	5.81	200
HJ-TDW-51200	18 × 210	0.018	0.457	0.01	0.254	51	0.042	1.06	4.28	200
HJ-TDW-59100	18 × 330	0.02	0.5	0.007	0.18	59	0.046	1.18	3.8	100
HJ-TDW-40110	20 × 216	0.011	0.27	0.01	0.25	40	0.032	0.82	3.82	110
HJ-TDW-41100	20 × 250	0.01	0.25	0.009	0.22	41	0.026	0.66	3.35	100
HJ-TDW-42108	20 × 260	0.018	0.45	0.009	0.22	42	0.04	1.01	4.16	108
HJ-TDW-46105	25 × 160	0.016	0.4	0.012	0.3	46	0.039	1	4.6	105
HJ-TDW-4090	30 × 250	0.01	0.25	0.008	0.2	40	0.026	0.65	3.1	90
HJ-TDW-3990	30 × 360	0.01	0.25	0.006	0.15	39	0.024	0.6	2.49	90
HJ-TDW-3675	40 × 250	0.01	0.25	0.009	0.22	36	0.028	0.72	3.65	75
HJ-TDW-5265	40 × 550	0.007	0.18	0.004	0.1	52	0.017	0.43	1.7	65
HJ-TDW-4050	50 × 250	0.01	0.25	0.008	0.2	40	0.028	0.7	3.28	50
HJ-TDW-4945	60 × 700	0.006	0.165	0.003	0.076	49	0.016	0.4	1.42	45
HJ-TDW-4235	80 × 700	0.004	0.1	0.003	0.076	42	0.011	0.27	1.21	35
HJ-TDW-4230	110 × 850	0.004	0.09	0.003	0.065	42	0.009	0.24	1.12	30
HJ-TDW-2918	165 × 1100	0.003	0.07	0.002	0.044	29	0.007	0.17	0.75	18
HJ-TDW-3015	165 × 1400	0.003	0.07	0.002	0.04	30	0.006	0.15	0.76	15
HJ-TDW-3313	200 × 1400	0.003	0.07	0.002	0.04	33	0.006	0.15	0.76	13
HJ-TDW-3209	250 × 1370	0.002	0.058	0.002	0.043	32	0.006	0.14	0.84	9
HJ-TDW-3907	325 × 1900	0.001	0.035	0.001	0.027	39	0.004	0.1	0.45	7
HJ-TDW-3410	325 × 1900	0.001	0.038	0.001	0.028	34	0.004	0.09	0.49	10
HJ-TDW-3008	325 × 2300	0.001	0.038	0.001	0.025	30	0.003	0.09	0.47	8
HJ-TDW-3503	375 × 2300	0.001	0.032	0.001	0.025	35	0.004	0.09	0.46	3
HJ-TDW-3302	400 × 2800	0.001	0.029	0.001	0.023	33	0.003	0.07	0.45	2
HJ-TDW-3401	500 × 3600	0.001	0.025	0.001	0.017	34	0.002	0.05	0.34	1

Table 5: Reverse Dutch Weave Mesh Specifications

Model	Mesh Count	Wire Diameter	Wire Diameter	Filter Rating	Weight	Weight
-	Warp/Inch × Weft/Inch	mm	inch	μm	lb/yd2	kg/m2
HJ-RD-4810	48 × 10	0.50 × 0.50	0.020 × 0.020	400	0.742	3.63
HJ-RD-6318	63 × 18	0.40 × 0.60	0.016 × 0.024	220	0.847	4.14
HJ-RD-7215	72 × 15	0.45 × 0.55	0.018 × 0.022	250	0.978	4.78
HJ-RD-10016	100 × 16	0.35 × 0.45	0.014 × 0.018	190	0.791	3.87
HJ-RD-10720	107 × 20	0.24 × 0.60	0.009 × 0.024	210	0.683	3.34
HJ-RD-12016	120 × 16	0.35 × 0.45	0.014 × 0.018	180	0.918	4.49
HJ-RD-13217	132 × 17	0.32 × 0.45	0.013 × 0.018	170	0.867	4.24
HJ-RD-15224	152 × 24	0.27 × 0.40	0.011 × 0.016	160	0.763	3.73
HJ-RD-16017	160 × 17	0.27 × 0.45	0.011 × 0.018	160	0.413	2.02
HJ-RD-17018	170 × 18	0.27 × 0.45	0.011 × 0.018	160	0.826	4.01
HJ-RD-17146	171 × 46	0.15 × 0.30	0.006 × 0.012	130	0.409	2
HJ-RD-18020	180 × 20	0.27 × 0.45	0.011 × 0.018	170	0.877	4.29
HJ-RD-20040	200 × 40	0.17 × 0.27	0.007 × 0.011	120	0.444	2.17
HJ-RD-24040	240 × 40	0.15 × 0.25	0.006 × 0.010	70	0.405	1.98
HJ-RD-26040	260 × 40	0.15 × 0.27	0.006 × 0.011	55	0.448	2.19
HJ-RD-29076	290 × 76	0.09 × 0.19	0.004 × 0.007	40	0.26	1.27
HJ-RD-30040	300 × 40	0.15 × 0.25	0.006 × 0.010	50	0.472	2.31
HJ-RD-30080	300 × 80	0.15 × 0.20	0.006 × 0.010	35	0.509	2.49

Table 6: 5-Heddle Weave Mesh Specifications

Model	Mesh Count	Wire Diameter	Thickness	Weight
-	Warp/Inch × Weft/Inch	mm	mm	kg/m2
HJ-5H-1513	15 × 13	0.9 × 0.9	2.6	5.67
HJ-5H-2420	24 × 20	0.6 × 0.6	1.7	3.96
HJ-5H-2817	28 × 17	0.47 × 0.47	1.41	2.53
HJ-5H-3018	30 × 18	0.5 × 0.5	1.48	3
HJ-5H-4825	48 × 25	0.3 × 0.3	0.82	1.64
HJ-5H-4845	48 × 45	0.29 × 0.29	0.83	2
HJ-5H-5536	55 × 36	0.3 × 0.3	0.84	2.05
HJ-5H-6536	65 × 36	0.3 × 0.3	0.84	2.27
HJ-5H-7740	77 × 40	0.24 × 0.24	0.68	1.65
HJ-5H-8060	80 × 60	0.2 × 0.2	0.55	1.4
HJ-5H-10759	107 × 59	0.16 × 0.16	0.45	1.09
HJ-5H-107125	107 × 125	0.16 × 0.14	0.45	1.27
HJ-5H-107132	107 × 132	0.16 × 0.14	0.44	1.3
HJ-5H-13285	132 × 85	0.14 × 0.2	0.44	1.47